Posted by David K. on November 20, 1999 at 03:42:58:
I used to have trouble locating my feet on the stock position of the foot pegs. It seamed like I could only get the inside toe suface of my boot on to the peg. and this was a very uncomfortable roost on a long trip. I completly solved the comfort problem by taking both pegs off and then reassembling them to oposite sides. Yes, the peg from the right went to the left and the left to the right. If you are unable to visualize the difference, look at the cycle and you will see that the mounts to the cycle are diagonals and by transposing the pegs, a change results, making the flat surface the top and not the narrow edge surface as the orriginal top. The feet are position lower, so an adjustment to the brake pedle is also necessary. Do this by loosening the adjustment screw. Also place a stop screw with a lock nut in the threaded hole (on the bottom of the pedle shaft).